Club Portable Swing Barrier Gate Mechanism Electronic With
Direction Indicator CE Approved
Introduce of the swing barrier gates
The whole product appearance using SUS304 stainless steel plate
stamping forming, intelligent swing gate can easily compatible with
IC card, ID card, barcode card, fingerprint and other card
identification equipment, to provide a civilized, orderly way,
effective management of people in and out. Can be widely used in
the station, wharf, subway, factories, buildings, intelligent
residential, hotels, clubs, enterprises and institutions need to
realize the intelligent management of the channel.
This product is divided into: Single Movement: for single channel
and multi-channel; dual movement: for multi-channel
Swing barrier gates Standard features & functions
1. Fault detection and alarm functions, easy to use and
2. The running status can be programmed and controlled with the
built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop working automatically within
the prescribed time and reset again after the default delay (till
4. Anti-breakthrough function. The gate is locked automatically
until opening signal received.
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds), the system will
cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function
1. Professional solutions at first place (we have whole team to do
the pre-sales job )
2. Competitive and reasonable price (we are 12 years factory)
3. Advanced technology (we have more than 50 patents )
4. Fast delivery (A individual shipping department)
6. Best service (we need money...)
7. High reputation of this industry (we we are not in the first ,
but fifth is no problem in turnstile industry).
8. All of the turnstile project in the website all using our
|Product Model||RNCF8008S||Communication interface||TCP/IP communication|
|Product size(mm)||Φ168*Φ89*H1060mm||Access speed|
40 person/min(normal open),
25-30 person/min(normal close)
|Pendulum channel||600mm||Gate opening, closing time||1-2 seconds|
|Length of swing arm||600mm||Time from power up to passage||3 seconds|
|Weight||40KG||Put the channel||1200mm|
|Swing arm transmission angle||180 degrees||Case material||#304 stainless steel|
|Swing direction||one side or both sides||Temperature||15 °C ~ 60 °C|
|Working voltage||AC220 ±10% V/50 ±10% HZ||Drive motor||DC motor (24V)|